Industries

Landscaping routing software for crews that mow every week.

Lead Mapper is landscaping routing software for companies running several crews and trailers. Every property from your CRM sits on one map, each crew gets an optimized route every day, weekly and biweekly customers share the same streets, and a rain day gets re-planned in one step.

Start free trialBook a 15-minute walkthrough

7-day free trial · No credit card · Keeps your current software

The cadence problem

Weekly, biweekly and seasonal work all want the same trucks.

A landscaping book is never one route. Weekly mows, biweekly mows, and seasonal jobs like aeration, mulch and leaf cleanup all sit on the same streets and pull on the same crews. Smart Service, which sells landscape software, counts a "thirty-week growing season". Fixr notes that in fall customers "may be able to move from weekly mowings to bi-weekly mowings", and every switch breaks a hand-built route until Lead Mapper rebuilds it.

Lead Mapper keeps every cadence on one map. Weekly and biweekly customers sit on the same street, each crew's week is rebuilt when a customer switches, and the seasonal jobs drop into the days a crew is already on that block.

Weekly mow Biweekly mow Seasonal job
Wk 1
Wk 2
Wk 3
Wk 4
Wk 5
Wk 6
Wk 7
Wk 8
Maple St
Oak Ridge
Birchwood
Cedar Ct
Elm Park
Pine Hill

Illustrative example. Elm Park moves from weekly to biweekly in week 6, and Lead Mapper rebuilds the crew's week around it.

Why route order is the margin

On a mow route, the mower pays. The trailer does not.

RealGreen, which sells lawn care software, writes that "most lawn care crews spend between 90 minutes and two hours of every working day behind the wheel", and that a crew "might hit 20, 30 or more properties in a single day". With that many stops, Lead Mapper's stop order decides whether the last lawn gets cut before dark.

Lead Mapper builds an optimized route for each crew every day, in the order that keeps the truck and trailer moving forward through the same neighborhoods.

Properties per crew, per day (example)20
Drive between properties, hand-built (example)8 min
Drive between properties, optimized (example)6 min
Time back per crew per day (19 legs x 2 min)38 min
Across 5 crews, per day190 min

Example numbers. Across 5 crews, that is more than three hours a day back on the mower instead of on the road. At about 25 minutes a property, that is roughly seven more lawns a day: $910 at Fixr's $130 average per visit, about $136,500 over a thirty-week season of five-day weeks.

The day the weather wins

A rain day does not cancel the mow. It moves it.

Nobody wants a mower rutting a soaked lawn. When the rain comes, a full day of weekly customers has to go somewhere, and every crew's next few days get reshuffled at once.

How a rain day usually goes

  1. The rain starts. The office texts crew leads to skip the rest of the day.
  2. The skipped lawns get tacked onto whatever day has room, often Saturday.
  3. Crews zigzag across town for the rest of the week to catch up.
  4. A weekly customer whose lawn sat for ten days calls someone else.

How Lead Mapper handles it

  1. The skipped properties stay on the map, marked and ready to place.
  2. One click re-optimizes every crew's route across the days ahead.
  3. Rescheduled lawns land next to the ones already booked on the same streets.
  4. Each crew lead sees the new day in the mobile app before the trailers roll.
Capture at the curb

The upsell gets spotted from the mower seat.

Your crews see every property every week. They notice the bare patch that needs aeration, the bed that needs mulch, the broken sprinkler head, the oak that will bury the yard in October. If that never makes it into the record, the office never quotes the job, and a competitor's door hanger does.

The crew lead speaks for twenty seconds in the mobile app. Lead Mapper turns it into the visit note, flags the upsell and any neighbor who asked for a price, and syncs it to your CRM. Your estimator can then size the job from satellite and street view before anyone drives back.

Crew lead, after the mow

"Front and back mowed, edged and blown. Sprinkler head by the side gate is snapped. Thin patches in the back, homeowner asked about fall aeration. Big oak out front, so put them down for leaf cleanup. Neighbor across the street wants a mowing quote."

Work doneMow, edge, blow
Account noteSprinkler head broken, side gate
Upsell flagsAeration, leaf cleanup
New leadNeighbor across the street, mowing quote
Illustrative example. Logged by voice, synced to your CRM.

Grow the street

Fill the block around every weekly stop.

Route density is the whole business in lawn care. A new customer two doors from a weekly stop costs almost no drive time. Lead Mapper shows the houses and businesses around your routes, so a crew or canvasser can work the street while the truck is there. It is the same move gutter cleaning companies make around every booked job.

The street around each route

See the homes near tomorrow's stops. Every neighbor you add tightens the route instead of stretching it.

Door hanger routes

Turn the blocks around your weekly customers into a short walking route for door hangers, with every conversation logged on the map.

Commercial grounds nearby

Office parks, HOAs and property managers near your routes surface as prospects, the kind of contract that runs all season and books snow in winter.

Lead Mapper AI

It plans the week so your office does not have to.

The AI learns your properties, cadences and crew territories, then does the planning that used to eat an ops manager's Monday.

Builds the weekWeekly and biweekly properties get balanced across crews and days, so no crew gets the long Thursday every week.
Re-plans the rain daySkipped lawns get folded into the days ahead and every crew's route is re-optimized in one step.
Writes the visit noteTurns the crew lead's voice note into a clean record with upsell flags and pushes it to your CRM.
Answers the book question"Which weekly customers on the east side have no leaf cleanup booked yet?" Plain answer, route attached.
Plugs into your stack

It reads from the tools you already run.

Lead Mapper syncs with Salesforce, HubSpot, Pipedrive and Zoho CRM, and connects to field service tools like Jobber or Housecall Pro to read your properties and jobs. Every account lands on the map with its address, cadence and service history. One source of truth, no double entry.

Running Aspire, LMN or Service Autopilot? We build the direct integration for your team.

Salesforce HubSpot Pipedrive Zoho CRM Jobber Housecall Pro + open API & CSV import

No implementation project

Landscaping routing software that runs your crews by this afternoon.

Good landscaping routing software does three things: puts every property on one map, builds each crew's week by cadence, and re-plans it when the weather turns. Getting there takes three steps, about half an hour, no consultant.

1 · Connect

Sync your CRM or field service tool, or import a CSV. Your properties, cadences and service history land on the map.

2 · Set territories

Draw a territory for each crew and assign the trucks. Lead Mapper builds the weekly routes right away.

3 · Invite the crews

Crew leads see the day's properties in the mobile app and log visit notes by voice. Larger teams get guided onboarding.

Straight answers

Landscaping routing software: what owners ask first.

Lead Mapper is landscaping routing software built for companies that run several crews: every property on one map, an optimized route for each crew every day, weekly and biweekly customers balanced across the week, rain days re-planned in one step, and your scheduling and billing left in Jobber, Housecall Pro or your CRM.
A lawn care route planner sets the order of a crew's stops for the day so the truck drives the shortest loop, and Lead Mapper is a lawn care route planner that does it for every crew at once, by weekly or biweekly cadence, straight from your CRM.
Lead Mapper plans each crew's day around its real stop count, and that count is high: RealGreen writes that a lawn care crew "might hit 20, 30 or more properties in a single day". At that density, Lead Mapper's tighter stop order is what adds the next lawn.
Yes, Lead Mapper keeps weekly and biweekly customers on the same streets and rebuilds each crew's week when a customer switches cadence, for example from weekly to biweekly in fall.
Lead Mapper takes the lawns the rain pushed, spreads them across the days ahead, and re-optimizes every crew's route in one step. The rescheduled properties land next to the ones already booked instead of at the end of a long drive.
No, Lead Mapper sits on top of the tools you already run. It syncs with Salesforce, HubSpot, Pipedrive and Zoho CRM, and connects to field service tools like Jobber or Housecall Pro to read your properties and jobs. Your billing and scheduling stay where they are.
Yes, Lead Mapper routes snow and ice accounts the same way it routes mowing: every lot on the map, a route per plow truck, and the order rebuilt when a storm moves the start time.

Beat the leaves. Keep every crew on the tightest route.

Stop rebuilding routes by hand after every rain day. Free for 7 days, no card, set up with a real person.