Drive time territories: the short answer
A drive time territory holds the accounts a rep reaches within a set number of minutes from base. Size it by workload, not by a round number: in the example below 45 minutes holds 256 accounts, a rep at 6 visits a day and monthly visits covers 110, and the drive time that fits exactly one rep is 29.5 minutes.
That last number is the capacity minute, and it changes with every region. Lead Mapper builds the drive-time territory from each rep's base on the map, shows the accounts inside and assigns it, so the line follows roads instead of a circle.
The drive time territory calculator
All numbers below are example inputs; replace them with yours. The road detour factor turns road miles into straight-line reach: a road route is longer than the line on the map, and 1.3 is an example value, not a measured one. Lead Mapper turns the result into a drive-time territory on your own accounts.
Reach from the rep's base
The region and the workload
| Result | Value | How it is calculated |
|---|---|---|
| Straight-line reach | 20.2 miles | minutes ÷ 60 × mph ÷ detour factor |
| Territory area | 1,281 sq mi | 3.1416 × reach² |
| Account density | 0.20 per sq mi | accounts in the region ÷ region size |
| Accounts inside the territory | 256 | territory area × density |
| Accounts one rep can cover | 110 | visits per day × field days ÷ visits per account per year |
| Workload of this territory | 233% of one rep | accounts inside ÷ accounts one rep can cover |
| Capacity minute | 29.5 minutes | drive time at which accounts inside = accounts one rep can cover |
| Reps to cover the region | 21.8 | accounts in the region ÷ accounts one rep can cover |
Check the result: a workload above 100 percent means the accounts inside the line get visited less often than the cadence says, and below 100 percent the rep drives past empty road to fill the day. Then load your accounts into Lead Mapper and draw the territory at the capacity minute.
How the drive time territory calculator works, step by step
A drive-time map follows roads, so its outline is a jagged shape, not a circle. For sizing, the calculator turns it into the circle with the same reach. With the example inputs:
- Road miles. 45 minutes at 35 mph is 26.25 road miles.
- Straight-line reach. 26.25 ÷ 1.3 detour factor = 20.19 miles from base.
- Area. 3.1416 × 20.19² = 1,281 square miles.
- Accounts inside. 2,400 accounts on 12,000 square miles is 0.2 per square mile, so 1,281 × 0.2 = 256 accounts.
- One rep's book. 6 visits × 220 field days = 1,320 visits a year; at 12 visits per account, that covers 110 accounts.
- Capacity minute. 110 accounts need 550 square miles at this density, a reach of 13.23 miles, 17.2 road miles, 29.5 minutes at 35 mph.
The 45-minute territory is 2.33 rep workloads. Either the line moves in to 29.5 minutes, or the cadence drops: at 6 visits per account per year one rep covers 220 accounts and the capacity minute is 41.7. Lead Mapper shows both on the map, the accounts inside each drive-time territory and the rep it belongs to.
The capacity minute in city, suburb and rural territories
Same rep, same 110-account book, four kinds of territory. Speeds and densities are example values:
| Territory | Road speed | Accounts per sq mi | Capacity minute |
|---|---|---|---|
| Dense city | 25 mph | 2.0 | 13.1 minutes |
| Suburb | 35 mph | 0.5 | 18.6 minutes |
| Rural | 50 mph | 0.05 | 41.3 minutes |
| Very rural | 50 mph | 0.02 | 65.3 minutes |
A single company-wide rule such as "every rep gets 30 minutes" hands the city rep more than five books (30 minutes there holds about 580 accounts) and leaves the rural rep with about half of one (58 accounts). The very rural row is past an hour: there the answer is a second base or a rep who stays overnight, not a wider line. Lead Mapper draws each territory from its own base, so the city and the rural rep each get the minute that fits their book.
Drive time or distance: which should define your territories
A radius treats a mile of interstate and a mile of mountain road as equal. Drive time does not, which is why the territory with a river, a bridge or one highway through it looks fair on a radius map and is not fair on the road. Use distance where roads run in a grid and speeds are even; use drive time where a rep's day is decided by a bridge, a range or a city center. Lead Mapper builds territories by ZIP code, county, hand-drawn shape, radius or drive time, on the same CRM accounts, so a manager can compare both lines before choosing.
Tip for a manager with 40 reps: run the calculator once per rep with that rep's own base and region, sort by workload, and start with the territories above 130 percent. Those are the reps whose A accounts get visited late. Redraw them at the capacity minute, hand the accounts outside to the neighbour with the lowest workload, and Lead Mapper keeps all 40 territories on one map with the rep assigned to each.
Build drive time territories in Lead Mapper
The calculator sizes the line; Lead Mapper draws it. It maps every account from Salesforce, HubSpot, Pipedrive or Zoho CRM, builds a drive-time map from each rep's base, saves it as a territory, assigns it to the rep and routes each field day inside it. Connect your CRM in the 7-day free trial, no credit card, and draw your first drive time territory today.
Related: sales territory mapping, sales force size calculator, call cycle template, cost per visit calculator.
FAQ
Drive time territories FAQ
What is a drive time territory?
A drive time territory is the set of accounts a rep reaches within a fixed number of minutes from base by road, and Lead Mapper builds it as a drive-time map on your CRM accounts and assigns it to the rep.
How do you calculate a drive time radius?
A drive time radius is road speed times drive minutes, divided by a road detour factor for the straight-line reach; in the example 45 minutes at 35 mph and a factor of 1.3 give 20.2 miles, and Lead Mapper replaces the circle with the real road outline.
What is a drive time map?
A drive time map shows the area reachable from one point within a set number of minutes by road, and Lead Mapper draws one from each rep's base and shows which CRM accounts fall inside.
How many minutes should a sales territory be?
A sales territory should be as many minutes as one rep's workload needs, the capacity minute; in the example on this page that is 13.1 minutes in a dense city and 41.3 in a rural region for the same 110-account book.
Should sales territories be drawn by drive time or distance?
Draw sales territories by drive time where rivers, bridges, ranges or city traffic decide the day and by distance where roads run in an even grid; Lead Mapper builds both on the same CRM accounts so a manager can compare the lines.
Keep reading
Sourced comparisons, pricing breakdowns and the field-sales tooling behind them.
Compare & pricing
- Best field sales software
- Sales routing software
- Sales mapping software
- Electrical contractor CRM
- Lead Mapper vs Badger Maps
- Badger Maps pricing
- SPOTIO pricing
- SPOTIO alternatives
- Leadbeam pricing
- Map My Customers pricing
- Outside sales vs inside sales
- Field sales software reviews
- Sales call report template
- Sales territory plan
- SalesRabbit alternatives
- SPOTIO vs SalesRabbit
- CRM mapping software
- Field sales software price index
- Territory management software
- What is outside sales
- Sales route planning
- Sales route planner
- Sales territory mapping
- Streets & Trips alternative
- Medical device sales careers
- Route4Me pricing
- SalesRabbit pricing
- GeoMapper alternative